Shifters

SRAM's MRX Comp Twist Shifters are simple to use and offer solid shifting and reliable construction. Shifting one gear or the whole range is simple with just a twist of the wrist. They shift a 2:1 Shimano rear derailleur and a SRAM or Shimano derailleur up front.

SRAM's X0 shifters are an absolute must for riders who desire and deserve the best. The adjustable clamp mount and trigger lever allow you to custom tune the shifters for one-finger, ergonomic gear changes that are near telepathic. Crafted with a compact aluminum body and super-smooth ball-bearing pivots, the X0s are super light and race-ready, yet built tough to handle all your off-road endeavors.

Multi-shifting gives the rider the possibility of shifting up or down by up to 11 sprockets at a time. This is a functionality possible only with the EPS electronic drivetrain. But Ergopower Chorus EPS offers even more than this: with superb ergonomics, simplicity, comfort and safety in all riding positions. A single click of the controls and you're headed for a whole new experience. - EPS (Electronic Power Shift) electronic shifter set with integrated brake levers - These shifters require specific, separate Chorus EPS Interface and Power Unit, battery pack, and front/rear derailleurs - Chorus EPS features composite body, alloy shift lever, and carbon fiber brake lever - Waterproof internal electrical board works in all weather conditions - Distinctive one lever, one action design keeps the beloved feel and fit of Campagnolo Ergopower systems - Micro-Switch, Multi-Dome technology creates a positive click upon pressing the levers, minimizing any unwanted shifts - Switch mode on both shifters allows micro adjustments during riding and query of the battery level - Ergonomic hood design follows the asymmetry of the hand, increasing the contact area of the palm and offering multiple riding positions - Ultra-Shift brake lever features a high fulcrum, which allows for easier reach and better braking control - Shifting wiring harness kits sold separately - Speed: 2 x 11-speed - Front/Rear: set - Adjustable Reach: Yes - Ultra-Shift brake cables and housing included - Weight: 350g

• Mountain-bike shifters built into linear pull-compatible brake levers • Aluminum • Left: triple chainring; Right: 8-speed • Cables and housing included

• Mountain-bike shifters built into linear pull-compatible brake levers • Aluminum • Left: triple chainring; Right: 7-speed • Cables and housing included

When SRAM began developing XX, they were looking to create the lightest, most precise and technically advanced components possible, and boy have they delivered! The XX Trigger Shifters are crafted from carbon, aluminum and high-grade composites to to ensure a ridiculously low weight, while still delivering the precision and durability SRAM is known for. What's more, they boast the smooth, crisp gear changes you've come to expect from SRAM and the levers are adjustable so you can fine-tune the fit for lightning-quick shifts.

SRAM's XX 10-speed compatible Grip Shift shifters are so good, the first time the were put in a race, they won a XC World Championship — and that was still in prototype form. They are so light, that when you include the grip, clamps, and cables, the whole set up tips the scales at a svelte 287 grams a pair. Three rows of ball bearings provide silky-smooth shifts and full metal indexing keeps shifting crisp and precise. And, finishing out this amazing shifter is a carbon housing that’s light and strong, and an integrated lock-on grip that provides a seamless transition to the shifter.

Dominate your bike at every turn, relax on the long straights, and prepare for the final sprint: whatever your racing position, Ergopower controls, with the exclusive Campagnolo mechanism allows you to shift up 3 sprockets at a time and down 5 sprockets. Make every movement natural, fast and precise. The Super Record series Ergopower Ultra-Shift controls are the top product in terms of technology applied to ergonomics, safety, speed, and precision shifting. Your every wish is a command. - Composite body, carbon-inlay shift lever and carbon fiber brake lever - Ball bearing shift mechanism combined with titanium internals - Ergonomic hood design follows the asymmetry of the hand, increasing the contact area of the palm and offering multiple riding positions - Two clicks downshift into the small chain ring, while a third shift is used for trim - Hypoallergenic silicone with multiple densities is used as hood material offering greater softness in the palm area and greater rigidity in the gripping area - No-Bulge technology smoothes the cable passage as the housing exits the controls - Campagnolo 2015+ 11-speed specific, not compatible with previous versions of Campagnolo 9/10/11 speed, Shimano or SRAM derailleurs - Speed: 2 x 11-speed - Front/Rear: set - Adjustable Reach: Yes - Ultra-Shift cables and housing included - Weight: 339g

It's all in your hands. From any position on the handlebars the ergonomics of Campagnolo's Ergopower controls enables you to engage the rear derailleur and front derailleur with extreme speed and precision. The Record shifters offer the maximum in performance while safety and comfort are not to be neglected: every detail is designed to provide sublime comfort even after long hours on the bike. - Composite body, carbon-inlay shift lever, carbon fiber brake lever and ball bearing shift mechanism - Ergonomic hood design follows the asymmetry of the hand, increasing the contact area of the palm and offering multiple riding positions - Two clicks downshift into the small chain ring, while a third shift is used for trim - Ergopower Ultra-Shift rear controls can shift the chain simultaneously three sprockets up or five down - Hypoallergenic silicone with multiple densities is used as hood material offering greater softness in the palm area and greater rigidity in the gripping area - No-Bulge technology smooths the cable passage as the housing exits the controls - Campagnolo 2015+ 11-speed specific, not compatible with previous versions of Campagnolo 9/10/11 speed, Shimano or SRAM derailleurs - Speed: 2 x 11-speed - Front/Rear: set - Adjustable Reach: Yes - Ultra-Shift cables and housing included - Weight: 348g

SRAM's Centra Twist Shifters are simple to use, offer solid shifting, and reliable construction. They feature a large ergonomic grip section and SRAM's 1:1 actuation for solid shifts. Plus, with a simple twist of the wrist, you can shift a handful of gears at once.

Shimano Alfine 11-Speed Internally Geared Hub Shifters - Includes shifter, 2100mm shift cable with housing and cable fixing bolt unit for CJ-S700 cassette joint - 22.2mm clamp diameter, Rapidfire shift pod - Shimano multi-gear shift, 2-way release and instant release features - Optical gear display - Shimano "top normal" shifting - Compatible with Alfine 11-Speed hubs only - Brake Lever Actuation: Long Pull - Drivetrain Speeds: 11

Be it the fireworks of a finale, an ideal rhythm, climbing on the top, or a deep, dark place extracting the last kilojoule of effort on your bike split, you want to adjust your gear with the twitch of a finger. eTap Blip satellite shifters allow you to shift when you want, where you want. - Limitless remote shifting positions for drop and aero bars - Wired shift buttons can be positioned however the rider prefers - Connect to Blip Box or drop bar eTap levers - Compatible with SRAM RED eTap shift/brake controls

SRAM's 500 Aero Shifters deliver all the performance and features of more expensive models for your time-trial or triathlon bike. These aluminum bar end shifters feature a three position internally adjustable stop that can be flipped and rotated for precise cable release tuning.

SRAM's 11-speed XX1 Trigger Shifter fires off shifts quickly, precisely, and most importantly, dependably. It uses SRAM's X-Actuation for sharp, consistent shifts over any terrain, in any condition. A carbon body and lever keeps the weight down, and the adjustable clamp mount and trigger position lets you dial in the ergonomics. Plus, its compact size plays well with almost all brake levers and is MatchMaker X compatible.

SRAM's 11-speed X01 Trigger Shifter fires off shifts quickly, precisely, and most importantly, dependably. It uses SRAM's X-Actuation for sharp, consistent shifts over any terrain, in any condition. An aluminum body and lever keeps the weight down, and the adjustable clamp mount and trigger position lets you dial in the ergonomics. Plus, its compact size plays well with almost all brake levers and is MatchMaker X compatible.

SRAM's X0 shifters aren't just a pretty face, they actually have an Olympic Gold medal to their credit. But you'd expect that from some of the lightest and quickest shifters out there and some of the easiest to use, too. They actually allow you to shift multiple gears at once, and with their simple twisting action you never miss shifts. Ride light, shift fast and go for the gold with X0!

Step up to the next generation in shifting with SRAM's wireless RED eTAP electric aero drivetrain kit. The aero kit includes Blip shifters, derailleurs, battery charger and USB stick. Brake levers not included. Each kit contains: - 4x SRAM eTAP 650mm Blip remote shifter buttons - SRAM eTAP Blip Box - SRAM RED eTAP wireless front and rear derailleurs - SRAM eTAP batteries - Battery charger - USB stick - Quick-start guide

Turn your time trial or triathlon bike into a smooth-shifting machine with Campagnolo's lightweight aluminum Record EPS TT Bar-End Shift Levers. Campagnolo's Back to Zero design returns the levers to their center position, keeping them out of the wind for supreme aerodynamics and ergonomics. And, Campagnolo's EPS shifting lets you shift as many cogs as you want by simply holding the lever.

Tucked neatly beneath your handlebars, the XX1 Eagle X-ACTUATION trigger shifter is the nerve center of the Eagle drivetrain. Its internal works have been updated to include a 12th gear, and improved to enhance trigger feel, precision and durability. Whether you’re 3 laps into your race or 150 days into your season, the XX1 Eagle trigger shifter is your faithful 1x touch point.

• Economical replacement twist shifters • Left: triple chainring; Right: 8-speed • Cables and housing included

SRAM's X0 10-speed compatible Grip Shift shifters are here to write the next chapter in Grip Shift history. Three rows of ball bearings provide silky-smooth shifts and full metal indexing keeps shifting crisp and precise. They feature an aluminum housing that’s light and strong, and an integrated lock-on grip that provides a seamless transition to the shifter.

The Deore M6000 Rapidfire shifters deliver light, smooth action paired with decisive shifts for fast and easy on-trail gear changes. The left shifter incorporates a mode converter so these components can be used with either 2x or 3x drivetrains. - OPTISLICK cable - Precise and consistent shifting performance - Ergonomic lever shape and easy lever access - Intuitive and readily visible OGD - 1 shifter for double and triple use - Shift Lever Type: RAPIDFIRE Plus - Front Shifting: 3/2 - Shift Cable Casing: OT-SP41

SRAM's X4 shifters feature Exact Actuation 1:1 cable pull ratios for precise, dependable 3-speed front shifting. They deliver SRAM's proven ergonomics and excellent performance at a great price.

Shimano Alfine SL-S503 8-Speed Internally Geared Hub Shifters - Includes shifter, 2100mm shift cable with housing and cable fixing bolt unit for CJ-8S20 cassette joint - 22.2mm clamp diameter, Rapidfire shift pod - Shimano 2-way release feature - Optical gear display

The GX Eagle shifters for the Eagle 1x12 drivetrains are high performance, moderately priced, and put total control of your gear selection in one hand. - Includes 2200mm cable - Updated SRAM twist mechanism for higher precision and increased durability - Rear Der/Shifter Compatibility: SRAM X-Actuation

Tucked neatly beneath your handlebars, the X01 Eagle X-ACTUATION trigger shifter is the nerve center of the Eagle drivetrain. Its internal works have been updated to include a 12th gear, and improved to enhance trigger feel, precision and durability. Whether you’re 4 stages into the race or days away from civilization, the X01 Eagle trigger shifter is your faithful 1x touch point.

Three decades ago, SRAM was founded on a product called Grip Shift, and an idea that shifting a bike should be easier, better and more intuitive. It’s more advanced than the original, but the X01 Eagle Grip Shift follows in the same tradition of making shifting easier, better and more intuitive. The X01 Eagle Grip Shift system includes robust internals that make it more durable and its shifting performance more precise. But just like the original, it is total control in the palm of your hand.

The GX Eagle shifters for the Eagle 1x12 drivetrains offer high performance, a moderate price and put total control of your gear selection in one hand. - Includes 2200mm cable - Aluminum trigger lever and updated internal mechanism provide crisp feel and precise shifts - Two clamp attachment locations help riders achieve ideal lever position - Includes discrete handlebar clamp - Shifter Style: Trigger - Drivetrain Speeds: 12 - Weight: 122 g - Rear Der/Shifter Compatibility: SRAM X-Actuation

Get sharp, dependable, Exact Actuation shifting with SRAM's GX 2x10 Rear Trigger Shifter. This right-side rear shifter is compatible with SRAM’s GX 2x10-speed components and offers precise, swift shifting across their wide-range 10-speed cassette. • Dedicated 10-speed rear trigger shifter • Multi-position mounting • Aluminum pull lever • MatchMaker X compatible • Weight: 122 grams

SRAM's most aerodynamic levers to date, the R2C TT Bar-End Shifters make your sleek time machine even faster. Thanks to the innovative shifting mechanism, the levers return to the center position after every shift, keeping the levers in the most aero position possible. And, with carbon fiber paddles and titanium hardware, these shifters are as light as they are beautiful.