Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Wheels

$2,083.99
- Origin8 Bolt 32mm inner width T700 UD carbon tubeless-ready hookless disc brake clincher - Origin8 Elite convertible MTB disc hubs with anti-bite Shimano cassette body featuring 6 pawl/54 point/6.6° engagement - 32 hole 15TA front/32 hole 12TA rear 6 bolt MTB disc hubs laced with straight pull Sapim CX-Ray spokes - ISO-Mountain certified and assembled in the USA - Boost spacing - Size: 29" - Width ID (mm): 24 - Axle: Thru 15mm - Thru 12mm - Rim Model: OR8 Bolt Carbon MTB XC - Hub Model: OR8 MT-1110 Elite MTB - O.L.D.: 110 - 148 - Gears: 8-11s Cass - Brake Type: 6B - Spoke Type: Sapim CX-Ray BK - Spoke Count: 32H - Wall: Double - Valve: Presta - ISO: 622 - Type: Tubeless Compatible
$94.99
The Rampage rear wheel rolls on a four-bearing sealed cassette hub with 14mm chromoly axle. It's hand-laced to a 36-hole Rampage double-wall rim, and features a 11T chromoly driver with 3-pawl system.It's designed for BMX 110mm wide frames. - Axle: 14mm chromoly - Driver: 1-pc chromoly RHD, 11T - Driver bearings: 6802 (x2), verify bearing number on side of rubber seal - Driver pawls: 3 pawl - Driver spring: Wraparound (x1) - Hardware: Steel (17mm wheel nuts) - Hub shell bearings: 6902 (x2) verify bearing number on side of rubber seal - Drilling: 36H
$92.99
- Sta-Tru Wheels ST725 silver anodized alloy single wall rims w/ 36holes - Attractive 21mm tall aero profile, and includes a nice 10.5mmbraketrack with wear indicator - Road style KT alloy road hub adds value - 36 UCP spokes
$266.90
When motor assistance and leg power meet, the range of terrain a bike can conquer grows almost exponentially. The H 1900 SPLINE is designed for this, now upgraded with the famous DT Swiss Ratchet technology. The Ratchet LN system distributes the combined forces from the rider and the motor over a larger area than the previous pawl freehub systems, increasing the systems’ durability thanks to lower load peaks. The 370 hub enables full power transmission to the ground with reinforced hybrid spokes laced to a resistant aluminum rim, available in two inner widths. - Aluminum rim, Hooked / Crotchet tubeless ready - DT Hybrid 1 spokes are reinforced and increase the lateral and torsional stiffness of the wheel - 370 Hub - Includes Tubeless Valve and Tape, 6-bolt adapter with lockring
$352.90 - $379.90
Your entire focus lies on the right line choice, the exact braking point and the spot-on steering movement. All the everyday stress fades away, you feel free and only hear the precise sound of the freehub system. The E 1900 Spline wheels were developed precisely for these freewheeling moments. A proven aluminum rim and hand-laced steel spokes provide the reliability required from an Enduro wheel. - Intended use = All-Mountain/Trail, Enduro and Freeride - Tubeless ready, 30mm wide and light rim - Straight-pull hubs/spokes built with a 3-cross pattern - Includes Tubeless Valve and Tape
$975.00
- Versatile aero wheelset for the modern road bike with tubeless and hookless rim profile - Optimized tire bed for easy tire installation - Wide 23mm rim profile creates a better tire interface to be fast on or off the road - New ZR1 DB hub is engineered in Germany with better seal design for improved durability and quicker response with 66 points of engagement - Ships with 12mm front and rear end caps - Center locking rotor interface. Lockring is included with the wheels - 1470g - Lifetime warranty
$352.90 - $379.90
After a long climb, the perfect trail lies ahead of your tires: flowy, dusty, varied, endless. Nothing holds you back from entering the All-Mountain thrills with the M 1900 Spline wheels. A rim developed with optimal balance of durability and weight offers efficient climbing characteristics as well as dent resistance on single trails. With experienced wheel building by hand, this wheel is a reliable partner to collect freewheeling moments in the mountains. - Intended use = XC and All-Mountain/Trail - Tubeless ready, 30mm wide and light rim - Straight-pull hubs/spokes built with a 3-cross pattern - Includes Tubeless Valve and Tape, 6-bolt adapter with lockring
$315.00 - $420.00
The PR 1600 SPLINE 32 is characterized by its super stiff yet lightweight medium-profile aluminum rim. The use of the PHR nipple system allows a very low weight. Stiffness is generated via the big cross-section and thanks to the 18mm internal width and the tubeless-ready design, it is ideally equipped for the use of modern road bike tires. The PR 1600 SPLINE 32 is a wheel that excels on any terrain, transfers every bit of energy into forward momentum, and takes every corner with Swiss precision.
$259.99
- Black Ops DW1.1 wheelsets for popular modern day BMX and wheelie bikes - Black Ops MX1100 hubs with sealed bearings and laced with DT spokes - 24mm inner rim width supports a variety of modern sizes - OLD: Front: 100mm, Rear: 110mm - Gears: Singlespeed freewheel - Type: Tube only - Size: 26-inch
$259.99
- Black Ops DW1.1 wheelsets for popular modern day BMX and wheelie bikes - Black Ops MX1100 hubs with sealed bearings and laced with DT spokes - 24mm inner rim width supports a variety of modern sizes - OLD: Front: 100mm, Rear: 110mm - Gears: Singlespeed freewheel - Type: Tube only - Size: 24-inch
$68.49 - $80.99
Sta Tru Rear Wheel - Single Wall rim - Wheel Size: 18-inch - Cassette Body Type: Threaded Standard 1.37-inch x 24tpi - ISO Diameter: 355 / 18-inch BMX - Valve: Schrader - Tire Type: Clincher - Rear Axle: 3/8-inch Threaded x 110mm
$622.90
Big tires and wide rims normally mean heavy wheels. But not with the BR 2250. Nearly as light as standard wheels and with the grip only fatties can offer, this wheelset turns any fat bike into a fun-machine. - Intended Use = Fat Bike - Internal Rim width = 76mm; External width = 81mm - 18 step star-ratchet drive system - Black J-bend spokes built with a 3-cross pattern and silver alloy Pro Lock nipples - Set up for 197mm thru axle with Shimano 9/10 freehub body installed - Includes 190mm thru axle end caps for Shimano freehub body, XD Driver with 190mm and 197mm thru axle end cap, 6-bolt adapter and rim strip - Tubeless kit in development
$299.95
Tom Ritchey believes in high-quality aluminum road wheels. They offer incredible performance and durability that's hard to beat at any price. He redesigned the critically acclaimed Zeta to be wider, lighter, and laterally stiffer—perfect for a great road riding experience, yet still tough enough to endure gravel road rides and cyclocross races that would chew lesser wheels to pieces. Combining decades of historic, ride-proven research and testing with modern standards, the Zeta is now available in a tubeless-ready Comp-level version, offering the legendary Ritchey ride quality at a more attainable price. - Rims: 6061 alloy Tubeless Ready - Rim depth: 28mm - Outer rim width: 23mm - Inner rim width: 17mm - Hubs: loose ball bearing - Freehub material: steel - Compatibility: Shimano 9/10/11s - Disc brake compatibility: No - Axle compatibility: quick release - Axle style: quick release - Spokes: DT Champion 2.0—straight - Front: 20 spokes / radial lacing - Rear: 24 spokes / 2x lacing - Nipples: 2.0 brass 12mm - Weight: 1.946g (set) - Do not use sealants containing ammonia
$657.00
- Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal. - 25mm width optimized for 40mm Gravel tires and up to 2.3" mountain tires - Light and durable 6069 aluminum with welded joint and reinforced spoke bed
$799.99
Race Face's first carbon wheelset comes to market during peak enduro, meaning people are hitting the trails as hard as they can at all angles. Striking the balance between shred-ready and climb-crushing, Race Face incorporated a generous 31mm internal width for a trail-stomping footprint, a durable carbon layout built for enduro style abuse, and an offset spoke hole layout delivering improved tension balance to up the sturdiness. With the Vault Hub’s super fast engagement, long bearing life and spoke flanges designed for maximizing lateral stability, you can take your rally to the next level. Get ready to be fast in every direction. 2 year no fault guarantee HUB - Large oversize flange for improved bracing angle - Larger bearings - No bearing adjuster needed - Wider bearing stance 6 double tooth pawls (3 engage at a time) - 120 points of engagement (3 degrees) - Independently sprung pawls - Balanced spoke counter bore - Tool-free interchangeable end caps (sold separately) RIM - Full carbon fiber construction - 31mm Internal width tubeless ready rim - 4.5mm Offset – Improves spoke balance and wheel stiffness - High gloss black water transfer logos
$308.00
- Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal. - 25mm width optimized for 40mm Gravel tires and up to 2.3" mountain tires - Light and durable 6069 aluminum with welded joint and reinforced spoke bed
$1,600.00
The ENVE 45 is a modern multi-purpose road wheel in every way. Riders with inclinations toward racing and hard solo efforts will find the rim's drag-taming and cross-wind defying shape a welcome upgrade to their rides. Those with inclinations towards the road lost and forgotten will find the rim's width and anti-pinch flat technology complementary to higher-volume tubeless road tires. All said, the ENVE 45 is everything that the dynamic modern road rider needs, and nothing that they don't. - Application: Road, Road Race, Triathlon, All-Road - Internal Rim Width: 21mm - Tire Compatibility: Tubeless 25c or larger - Wheelset Weight: 1541g - Real World Foundation Aero Technology - Wide Hookless Bead provides pot-hole protection - Tubeless Optimized for Rolling Fast and Fewer Flats - Lifetime Incident Protection and 5 Year Factory Warranty - Handmade in Ogden, Utah
$616.90
Snappy acceleration is what you can expect from this aluminum wheel developed to meet all cross country needs. If, to you, cross country means high-speed, after-work rides, and the occasional endurance race, then you should have a closer look at the XR 1700 SPLINE wheels. With a light and welded cross country aluminum rims, reliable 36T RATCHET SL hubs, and Swiss precision finish, all the way from the competition spokes to the signature DT Swiss wheel build quality, it's a wheelset that is up to competing, day-in, day-out, against yourself, against your buddies, or in an all-out race.
$450.00
The 350/XM421 front wheel features a DT350 straight pull, front boost Center-Lock disc hub, built with Champion spokes to a 28 hole 29" DT XM421 rim.
$255.90
Your entire focus lies on the right line choice, the exact braking point and the spot-on steering movement. All the everyday stress fades away, you feel free and only hear the precise sound of the freehub system. The E 1900 Spline wheels were developed precisely for these freewheeling moments. A proven aluminum rim and hand-laced steel spokes provide the reliability required from an Enduro wheel. - Intended use = All-Mountain/Trail, Enduro and Freeride - Tubeless ready, 30mm wide and light rim - Straight-pull hubs/spokes built with a 3-cross pattern - Includes Tubeless Valve and Tape, 6-bolt adapter with lockring
$1,721.90
Featuring the new generation Ratchet System hubs that are lighter and faster than ever before, along with bladed spokes and the superb wheel build quality and reliability you expect from DT Swiss, the XRC 1200 SPLINE 25 is a race-bred trail machine that loves to go fast. It accelerates like nothing else, tracks like nothing else, and is reliable like nothing else. It is the benchmark for high speeds on any trail, on any gravel road, and in any race — whether that race takes place between the tape or in your head. - SRAM XD MTB cassette-compatible
$650.00
The all-new SLR 1 36 Disc WheelSystem provides high-performance versatility, combining maximum power transmission with optimal stiffness, efficiency and weight savings to make it as quick on the climbs as it is confident on the descents.
$565.00
The SLR 2 36 Disc brings the performance gains of a stiff, lightweight carbon wheel to more riders everywhere. Light enough for all-day challenges through the mountains but strong and durable for daily training on variable terrain, the SLR 2 36 Disc’s optimized carbon layup contributes to significant weight reduction for better climbing as Giant hookless technology offers a wide inner rim width for a more confident ride.
$378.90
Versatility. A mountain bike is meant to go up and down mountains and to provide fun while doing so. The H1700 Spline do precisely that. And since e-bikes allow the rider to go up and down many mountains in one ride, reliability and weight is key. - 350 based Spline hub - E-bike specific straight pull spokes are built with a 3-cross pattern - Includes tubeless tape and tubeless valve
$404.90
Whether you are cutting through mud, dancing on icy, frozen trails or exploring dusty desert roads, you will feel the efficiency of these wheels. CR 1600's are ready to attack the challenges you put in front of them. - 350 based Spline hub with 18t ratchet system - Straight-pull hub and spokes are laced 2-cross - Includes tubeless ready tape and tubeless valve
$1,036.90
High end, bladed straightpull spokes and the most reliable and light weight freewheel system make for an efficient ride. Offering the perfect blend of comfort, grip and lightweight in combination with a higher volume tire, the wide and stiff full carbon rims accelerate with the best of them. So the PRC 1400 SPLINE 35 is ready for anything, are you? - Spline 240S based hub
$255.90
Enter the Cross-Country world with the X 1900 Spline wheels. The 25 mm wide aluminum rim offers modern tires the support needed to ride low air pressure in order to minimize rolling resistance. Meticulous wheel building by hand ensures the highest quality and reliability, allowing riders to just focus on the moment - whether it is beating the sweat out of their opponents or beating their own KOM or QOM.
$611.90
The pinnacle of aluminum road wheels. The ceramic OXIC surface coating brings brake performance to rim brakes like it has never be seen before. The rims are wide, asymmetric, and lightweight, making for an outstanding stiffness to weight ratio. If set up tubeless, supreme comfort and grip are added to the athletic character. - OXiC rim surface technology for improved braking performance and wear - Tubeless Ready rim compatible with standard clincher tires - 240 hub and ProLock Squorx ProHead spokes built with radial lacing - Factory installed tubeless-ready tape - Includes titanium RWS skewer, tubeless valve and Swissstop BXP blue brake pads
$1,591.90
The Aero+ concept comes into the E-road segment. With the HEC 1400 Spline, DT offers the perfect endurance wheelset for E-road bikes, delivering all the advantages of the Aero+ concept mixed with E-bike- specific components to ensure a long-lasting and trouble-free ride. A valuable upgrade for any high-end E-road bike, these wheels will bring a big smile to the rider's face and many envious glances from overtaken riders.
$1,110.90
The ARC 1400 DiCut wheels also benefit from the AERO+ profile supporting safe riding in the aero position through optimal aerodynamics. The combination of new and proven aero components allows cyclists to control many riding situations at high speeds. - AERO+ optimized rims by Swiss Side - Stainless steel bearings